Check your heating system can play an important role in the maintenance of your electric bill high or low. Surprisingly, we see that most houses are only a few years, does not have an adequate control and even if they are out of date or time in service. No wonder that energy costs will be high due to badly designed, poorly maintained and outdated control systems for the household energy wasting.
Therefore, utility companies and authorities in many countries, discounts will be extended to their expenditure on the improvement of control systems for heating.
Here are some facts to check the updates of the heating system.
Radiator Valves (TRV)
VRT is an engine valve installed in the hot water pipes in the radiator and is operated in a processing room thermostat. The valve can be provided with 2 or 3 p port-system applications such as. VRT has only a simple on / off. That is, once the thermostat is set at a temperature of your choice, the valve motor is activated and the valve remains open. The hot water boiler is led through the cooler to maintain the necessary heat to the desired temperature. When the temperature reaches the thermostat the engine, switched off the engine and cut the hot water, gradually make the room cooler. Once the lowest value of the thermostat reaches a different signal is received at the thermostat back to power the motor for the circulation of hot water is restored and the process repeated.
In a VRT the 3 ports on the valve operates as a device for hot water through the radiator of the signal from room thermostat. The hot water pipes are not under pressure or water hammer in this Agreement.
The room or area will receive only the thermal energy is only important to a comfortable temperature level that you hold in this scenario given to save energy waste into the old VRT system less. They are particularly useful in the rooms (guest rooms), which requires a different temperature than that of another (eg living room and kitchen)
Programmable Timer 7-day forecast
The programmable timer, 7 days a heating system based on your heating system daily or weekly trends in the demand for hot water. The idea is to leave the vessel in certain areas or operational controls and close at different times of the day (or week) with no operating system when there is no demand. Therefore, their liability is limited based on the schedule on their patterns of housing. The rest (eg start / stop feeding the different zones, etc.) is supported by the timer.
Locking boiler
In the design of the boiler, which start at your disposal if you need a system of circulating water for their water needs of the kitchen for example. Once the task was closed and the process has a considerable amount of energy to water for heating, if the request is for her heat to escape. The pump runs continuously.
In a locking system of the boiler will only work if necessary, to save energy.
All major components and controls, like the boiler, cylinder thermostat, room thermostat,
VRT and pump are electrically connected for this purpose.
Time and temperature controlled heating
Heaters are a function which is a waste;
• The water may be hotter than necessary (60, for example, when the temperature of hot water, heating, 0C
• Add cold water to the hot water low
• The water heater can operate for a period longer than necessary, leading to water at a given temperature
Timers and controls installed in the immersion, and began to set time and temperature of the waste stream is minimized.
Straggler
the smooth running of the hot water pipes, tanks and cylinders is generally appreciated by the power bill at home, waste and pollution caused by the same evil. This is a good place to start upgrading the heating system, if you're a craftsman, if subsidies for relief and improvement.
0 comments:
Post a Comment